Siemens SIMATIC FS600 Instruction Manual page 108

Loca- Description
tion
2401 Reference measurement on
the dark reference element
2402 Reference measurement on
the light reference element
2701 Processing of messages for
system diagnostics
2702 Processing of requests for
diagnostics data
2800 Processing of inputs for
detection zone changeover
2800 Processing of inputs for
detection zone changeover
2800 Processing of inputs for
detection zone changeover
2800 Processing of inputs for
detection zone changeover
2800 Processing of inputs
during scanner operation
2801 Test of inputs for
detection zone changeover
2802 Initialization of detection zone
changeover
2802 Initialization of detection zone
changeover
2802 Initialization of detection zone
changeover
2802 Initialization of inputs during
power-on
3016 Monitoring the access
authorization with one-time
password
Table 15.0-1:
108
Diagnostic Codes and Causes
No. Description
13 No removal value can be calculated
for reference measurement. Dust in
device because connector housing
or dummy connector not screwed
on
10 No distance value can be calculated
for reference measurement.
Glare from another source of light
(905 nm) or deviation in motor
rotation speed
1 Invalid diagnostic command
received. Software and firmware
incompatible
3 Invalid diagnostic value requested.
Software and firmware incompatible
2 2 detection zones active longer than
1 s
3 The detection zone changeover that
occurred does not correspond to the
requirement programmed in the
scanner.
4 More than 2 detection zones
selected during operation
6 Unevaluatable data or
defective data quality for activation
of detection zone
8 No detection zone activated during
scanner operation
1 Error during testing of inputs for
detection zone changeover,
internal fault
3 The detection zone deactivation that
occurred does not correspond to the
requirement programmed in the
scanner.
4 More than 2 detection zones
selected during Power-On
6 Unevaluatable data or defective
data quality for deactivation of
detection zone
8 No detection zone activated during
scanner starting
11 Confirmed one-time password was
entered incorrectly