Removal
1)
Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2)
Remove the COVER MSI. (RRP1.11)
3)
Remove the TRAY ASSY BASE. (RRP1.12)
4)
Remove 1 screw securing the BRACKET ASSY ELIMINATOR to the CHUTE ASSY OUT (PL6.1.1).
5)
Raising the left end of the BRACKET ASSY ELIMINATOR upward, pull out the BRACKET ASSY
ELIMINATOR toward the left to remove from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-259