Konica Minolta Magicolor 3300 Service Manual page 197

Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CST SLIDE. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove the INDICATOR. (RRP3.10)
10) Remove the GUIDE INDECATOR. (RRP3.11)
11) Remove the HOUSING ASSY FEEDER R. (RRP3.5)
12) Deflecting the shaft of the HOUSING ASSY FEEDER R securing the right axis of the LEVER LOWER
PAPER from the bottom surface of the HOUSING ASSY FEEDER R and shift the right axis.
13) Push in the actuator of the LEVER LOWER PAPER to the inside of the HOUSING ASSY FEEDER R
from the left side of the HOUSING ASSY FEEDER R.
14) Raise the LEVER LOWER PAPER above perpendicularly above the HOUSING ASSY FEEDER R and
pull it out upward.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
3-197