Side Shelf Handle & Battery Installation - Jenn-Air 730-0165 Use And Care Manual

SIDE SHELF HANDLE ASSEMBLY
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver
1. Remove the four side shelf handle screws from the side of the shelf.
2. Align the holes in the handle with the holes in the side shelf.
3. Insert the screws and tighten.
BATTERY INSTALLATION
1. Remove the ignition button housing.
2. Insert the battery into the housing with the positive terminal facing outward.
3. Replace the ignition button housing after the battery has been installed.
7