How To Install And Set The Probe; To Set Probe Feature - Jenn-Air EXPRESSIONS W27400 Use And Care Manual

IHow t o Install and Set t_,e Probe 1
BASIC _ '
to start coo g y.
To set probe feature
1. Insert the probe into the food item.
For meats, the probe tipshould be located
in the center of the thickest part of the
moat and not in fat or touching a bone.
Place the food in the oven using the rack
position suggested on page 9.
Insert the probe plug into the receptacle located on the top left of the oven. Be
certain to insert plug into the receptacle all the way.
Note: After the probe is inserted, the IndicatorWord PROBEwin flash and a beep
will sound reminding you to enter the desired probe temperature.
2. Touch Probe Pad.
Indicator Word PROBE will flash and three dashes will be shown in the Display.
3. Touch the appropriate number pads to set the temperature for desired degree of
doneness.
The temperature may be set in 5o increments. (Allowable range is 100° to 200°.)
Example: At 10 o'clock to set the probe for 150%touch the Probe Pad and the
number pads "1,5,0". After five seconds the Display will show probe temperature
or 95°,whichever is higher. IndicatorWords CONV, BAKE and ROAST will flash.
I0:00
I
22