To Set Time Of Day - Jenn-Air W27100 Use And Care Manual

When electrical power is supplied or after power interruption, t he last clock time
displayedbefore powerwas Interrupted will flash. Time will advance and continueto
flash untilclockis reset.
To set time of day
1. Touch Clock Pad.
Indicator Word TIME willflash and time digitswil_remainin the Display, (If more
than fifteen secondselapse betweentouchingClock Pad and touchingan Arrow
Pad, Clock Pad mustbe touched again in orderto set clock.)
2. Touch the Up or Down Arrow Pad(s) until correct time of day appears in the
Display.
Note: Four secondslater, the time of day will automaticallvbe entered,
IMPORTANT
• To recall time of day when another time function is showing: Touch Clock
Pad,
• To change time of day set on the clock: Repeat Steps 1 anci2 above.
• Clocktimecannot bechangedwhen ovenhas been programmedforTimed Bake,
Timed ConvectBake,TimedConvectRoast or Self-clean. Cancelprogrambefore
reprogramming clock.
11