Probe Jack Assembly - Jenn-Air JMW2430D Technical Education

COMPONENT ACCESS
REMOVING THE PROBE JACK ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
From inside the oven (right side wall) remove a nut
that mounts the jack in place.
4-12 Microwave Combination Wall Ovens
n
From behind the oven remove the back service
panel and disconnect the probe electrical connec-
tion.
WARNING
From the right side of the oven remove the side
insulation cover (top front and rear service covers
Electrical Shock Hazard
are also removed).
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Back of Oven with the rear service panel and the
right side Insulation Cover panel removed
Pull the insulation back to expose the jack assem-
bly and pull (fish) the jack wiring harness out.