Table of Contents
Advertisement
To set
oven
to start
cleaning
at at later
time:
An automatic
program
of 3 hours
is pre-set
for an average
soiled
oven. For a heavily
soiled oven, program
can be extended
up to 4 hours.
a. For an average soiled oven: Push SELF-CLEAN
button.
For a heavily soiled oven: Push SELF-CLEAN
button. Turn SET dial to 4:00.
b. Push STOP TIME button. Turn SET dial to time of day desired for clean cycle to
end. The start time will be calculated.
NOTE:
To prevent accidentally
changing
the cleaning cycle, p.ush TIMER button to
return to time of day.
6. The cleaning process begins immediately
unless the self-cleaning
process has been
set for a delayed
start When the oven temperature
reaches 550 °F, the LOCK
INDICATOR
LIGHT will glow and the door cannot be opened until the temperature
drops below 550° F. DO NOT TRY TO UNLOCK
THE DOOR WHILE LOCK INDI-
CATOR LIGHT IS ON. The normal cleaning process takes the time selected on the
clock plus about 45 minutes for the oven to cool down before the LOCK INDICA-
TOR LIGHT goes out and the door can be opened.
7. After the LOCK INDICATOR
LIGHT goes out, move the DOOR LOCK LEVER to the
left. The oven door can now be opened.
8. Turn the SELECTOR
AND THERMOSTAT
knobs from CLEAN to OFF after the
door is unlocked.
To stolD cleaning
process
before
lock
indicator
light
comes
on:
1. Move the DOOR LOCK LEVER to the left.
2. Turn SELECTOR and THERMOSTAT
knobs from CLEAN to OFF.
3. Push SELF-CLEAN
button.
To stop
cleaning
process
after
lock
indicator
light
comes
on:
1. Push SELF-CLEAN
button.
2. Leave the THERMOSTAT
and SELECTOR knobs in the CLEAN position.
3. Allow oven to cool until the LOCK INDICATOR
LIGHT goes out. This may take up to
45 minutes, depending
on how long the oven has been on.
4. After LOCK INDICATOR
LIGHT goes off, move the DOOR LOCK LEVER to the left.
5. Turn SELECTOR and THERMOSTAT
knobs from CLEAN to OFF.
2O
Hide quick links:
Advertisement
Table of Contents
