3.1.7 Removing the Function board assembly
(See Fig.12)
(1) Disconnect the card wire from LCD board assembly con-
nected to connector
CN103
bly.
(2) Remove the four screws H attaching the Function board
assembly.
3.1.8 Removing the Power switch board assembly
(See Fig.13)
(1) Disconnect the connector wire from LCD board assembly
connected to connector
assembly.
(2) Remove the three screws J attaching the Power switch
board assembly.
1-10 (No.MB593)
of the Function board assem-
CN709
of the Power switch board
H
H
H
CN103
Fig.12
CN709
Fig.13
H
J
J