Fisher-Price POWER WHEELS 75598 Assembly And Owner's Manual page 19

29
Sport Bar Bracket
Ring
Tunnel
• Using safety scissors, remove the sport bar brackets from
the plastic connector. Dispose of the plastic connector.
• Position the sport bar upright.
• Fit a sport bar support through a tunnel in a rear corner
of the canopy. Make sure the ring end of the sport bar
support is positioned toward the sport bar.
• Position a sport bar bracket above one of the sport bar
side legs, as shown.
• Fit the ring on the sport bar support against the end of
the sport bar bracket.
• Fold the sport bar bracket over the sport bar to close it
around the sport bar and sport bar support.
30
• Insert a #6 x 1 1 / " screw through the sport bar bracket
2
and into the sport bar.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat steps 29 and 30 to attach the other sport bar
support and sport bar bracket to the other sport bar
side leg.
Assembly
Side Leg
Sport Bar
Support
Sport Bar
Bracket
19
31
Sport Bar
• Position the sport bar with the ends on a flat surface,
as shown.
• Fit and hold the front and back halves of the KC
rack against the sport bar. Make sure the two KC
rack halves are aligned, and that the screw holes in the
KC TM light rack are aligned with the screw holes in the
canopy and the sport bar.
• Insert and "snap" the tabs on the front half of the KC
light rack into the slots below the light housings on the
back half of the KC TM light rack.
• Insert two #6 x 1 1 / " screws through the holes in the back
2
of the KC TM light rack, through the sport bar, and into the
front half of the KC TM light rack.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Wide Slots
32
• Align the four tabs on the inside of a light cover with
the four slots in one of the light housings on the
KC TM light rack.
Hint: Make sure the light covers are positioned with the
wide tabs at the top.
• Push firmly on the light cover to "snap" it to the
light housing.
• Repeat this procedure on the other side of the KC
rack to assemble the other light.
KC TM Light
Rack - Back Half
Tabs
KC TM Light
Rack - Front Half
TM light
TM light
TM
KC TM Light Covers
Wide
Tabs
TM light