Download Print this page
Fisher-Price SUPERSIZE SANDBOX 75967 Instructions
Fisher-Price SUPERSIZE SANDBOX 75967 Instructions

Fisher-Price SUPERSIZE SANDBOX 75967 Instructions

Fisher-price backyard playset user manual

Advertisement

Quick Links

Clean-up
• Cover the sandbox to help keep water and dirt out of the sandbox.
• Spread the cover over the top of the sandbox.
• Fasten the elastic loops on the cover to the pegs on the side of the sandbox.
Helpful Hint: Place a sand pail upside-down (or similar object) in the center of the sandbox
before putting on the cover. This will help to keep water off of the top of the cover.
Care
• Check the plastic parts regularly and if broken or cracked, dispose of them properly.
• Use a mild soap and water solution and clean cloth to clean this product. Rinse with
clean water to remove soap residue.
Storage
Base
Tabs
Bottom View of Sandbox
• Remove sand from the sandbox.
• Turn the sandbox upside-down.
• Push the tabs outward on the bottom of the base to remove the cap.
Separate the panels.
• Store all parts indoors when the outdoor temperature drops below freezing.
Peg
Elastic Loop
Tabs
Supersize Sandbox
Instructions
Model 75967
• Please save these instructions for future reference.
• Adult assembly is required.
• No tools are needed for assembly.
• If you experience a problem with this product, or are missing a
part, please call us at 1-800-432-KIDS, rather than return this
product to the store.
• This product holds up to 500 lbs. of sand (not included).
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in U.S.A.
75967
A
0920

Advertisement

loading

Summary of Contents for Fisher-Price SUPERSIZE SANDBOX 75967

  • Page 1 1-800-432-KIDS, rather than return this product to the store. • This product holds up to 500 lbs. of sand (not included). Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. Printed in U.S.A. 75967...
  • Page 2 Assembly 2nd Panel Slots Grooves Tabs Ribs 1st Panel Base • Place the base on the surface in which you intend to use the sandbox. Note: Assemble the panels to the base going in a clock- wise direction. • Fit the grooves on one of the panels to the ribs on the base, as shown.