Epson PhotoPC 850Z Service Manual page 85

EPSON PhotoPC 850Z
10. Fix the Compl Holder Gear on the Compl Holder Barrier with 2 special
screws (1.7x2.5) (1).
(Tightening torque: 0.6 ~ 1.0kgf-cm)
Figure 4-26. Installation of Compl Holder Gear
11. Fix the Compl Cabinet Front on the Compl Holder Barrier with 4 screws
(1.7x5.0) (1).
(Tightening torque: 1.3 ~ 1.7kgf-cm)
12. Fix the Compl Motor Barrier (2) on the Compl Cabinet Front with 2 screws
(1.7x4.0) (3).
(Tightening torque: 1.0 ~ 1.4kgf-cm)
Disassembly and Assembly
Figure 4-27. Installation of Compl Holder Barrier and
Assembly Procedure
Compl Motor Barrier
Revision A
85