Installation Of Microphone And Sy2 Board - Epson PhotoPC 850Z Service Manual

EPSON PhotoPC 850Z

4.3.6 Installation of Microphone and SY2 Board

1. Install the LCD Monitor (see 4.3.5 "Installation of LCD").
2. Install the Microphone (2) on the SY2 Board.
3. Connect the Assy. Wire (3) to the SY2 Board.
4. Fix the SY2 Board with 3 screws (1.7x4.0) (4).
(Tightening torque: 1.0 ~ 1.4kgf-cm)
5. Connect the harness of the Microphone to CN182 of the CA2 Board, and
place the harness between the SY2 and CA2 Boards.
6. Connect the FPC to CN321 of the SY2 Board.
Disassembly and Assembly
Twist the harness of the
Microphone and push it in
between the SY2 and CA2.
To CN182
CN321
Figure 4-16. Installation of Microphone and SY2 Board
Assembly Procedure
CN182
To CN321
Revision A
77