Installation Of Lcd; Installation Of Spacer Monitor - Epson PhotoPC 850Z Service Manual

EPSON PhotoPC 850Z

4.3.5 Installation of LCD

4.3.5.1 Installation of Spacer Monitor

1. Attach 3 Spacer Monitors S (1) on both sides of the LCD Monitor.
2. Attach a Spacer Monitor L (2) on the LCD Monitor.
Disassembly and Assembly
Align here.
Align here.
1. Fold the Spacer Monitor along
the cut on the peeling-off paper.
Peeling-off Paper (Small)
2. Remove the large
peeling-off paer.
3. Attach the Spacer Monitor
on the LCD.
Figure 4-12. Installation of Spacer Monitor
Spacer Monitor should not cover
any part of the LCD surface.
Do not attach this part.
4. Remove the small peeling-off
paper and attach on the LCD.
Assembly Procedure
Attach
Attach
Revision A
74