Installation Of Holder Battery - Epson PhotoPC 850Z Service Manual

EPSON PhotoPC 850Z

4.3.9 Installation of Holder Battery

1. Install the Holder Chassis B (see 4.3.8 "Installation of Holder Chassis B).
2. Insert the Spacer CF (3) between the CA2 Board and the Socket CF.
NOTE: There is a certain direction for inserting the Spacer CF. Refer to
Figure 4-19 for the correct direction.
3. Fix the Holder Battery (1) on the Holder Chassis with 3 screws (1.7x4.0)
(2).
(Tightening torque: 1.0 ~ 1.4kgf-cm)
Disassembly and Assembly
Note: Turns of lead wire
should look like this.
Crease
Figure 4-19. Installation of Holder Battery
Assembly Procedure
PW1
Side View
Harness of TB1
Socket CF
Spacer CF
Revision A
PW1
CA2
80