Cmos Setup Utility - Intel ITX-IC2M1026S Series User Manual

Intel Atom Series
4.5 BIOS Setup — CMOS Setup Utility
• In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.This chapter were based mainly on
the model, unless specif cally stated.
• Do not change the BIOS parameters unless you fully understand its function.

4.5.1 CMOS Setup Utility

After powering up the system, the BIOS message appears on the screen,when the first time
or when CMOS setting wrong, there is following message appears on the screen , but if
the first BIOS be setuped(or loaded default values) and save, the <DEL> key will be
pressed if you will enter BIOS setup menu.
If this message disappears before you respond, restart the system by pressing <Ctrl> +
<Alt>+ <Del> keys, or by pressing the reset button on computer chassis. Only when these
two methods should be fail that you restart the system by powering it off and then back on.
After pressing <F1> or <Del> key, the main menu appears.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends,Inc.
Main Advanced Chipset
BIOS Information
BIOS Vendor
Core Version
Compliency
Project Version
Build Date and Time
System Language
System Date
System Time
Access Level
Version 2.14.1219. (C)Copyright 2011 American Megatrends, Inc.
The menu bar on top of the screen has the following main items:
Main
Advanced
Chipset For changing the system ports settings.
Boot
Security
JUSTw00t
Save & Exit
Press DEL
<
Boot Security
American Megatrends
4.6.5.3
UEFI 2.3;PI 1.2
MB00A421
02/29/2012 12:22:00
[English]
[Sun 01/04/2011]
[17:27:30]
Administrator
For changing the basic system configuration.
For changing the advanced system settings.
For changing the system boot configuration.
For changing the system security setttings.
For changing the overclocking settings.
For changing CMOS mode and loading default settings.
to enter SETUP
>
JUSTw00t Save&Exit
- 21 -
User's Manual
Choose the system default
language
→ ←
:Select Screen
↑↓:Select Item
Enter: Select
+/-:Change Opt.
F1 :General Help
F7 :Previous Values
F9 :Optimized Defaults
F10:Save&Exit
ESC:Exit