SoftBank 304HW User Manual page 213

・ Router Setting Special Applications
➜
Item
Name
Status
Trigger Port
Trigger Protocol
Open protocol
Open port
Options
・ Router Setting DMZ
➜
Item
DMZ
DMZ IP address
・ Router Setting SIP ALG
➜
Item
SIP ALG
SIP port
・ Router Setting UPnP
➜
Item
UPnP
・ Router Setting NAT
➜
Item
NAT
・ Router Setting Out Of Service Notification
➜
Item
Out Of Service Notification
・ System Device Information
➜
Item
Device Information
Options (Range/Default Value)
・ Options: Up to 40 characters in half-width alphanumeric and half-width symbols (excluding
, " : ; ¥ & % + ' < > ?)
・ Default Value: (Not set)
・ Options: ON, OFF
・ Default Value: OFF
・ Options: 1 to 65535
・ Default Value: (Not set)
・ Options: TCP/UDP, TCP, UDP
・ Default Value: TCP/UDP
・ Options: TCP/UDP, TCP, UDP
・ Default Value: TCP/UDP
・ Options: 1 to 65535
・ Default Value: (Not set)
OK, Cancel
Options (Range/Default Value)
・ Options: ON, OFF
・ Default Value: OFF
・ Options: Four sets of 0 to 255
・ Default Value: 192.168.128.100
Options (Range/Default Value)
・ Options: Checkmarked (enable), Not checkmarked (disable)
・ Default Value: Not checkmarked
・ Options: 1 to 65535
・ Default Value: 5060
Options (Range/Default Value)
・ Options: Enable, Disable
・ Default Value: Enable
Options (Range/Default Value)
・ Options: Cone, Symmetric
・ Default Value: Cone
Options (Range/Default Value)
・ Options: Turn On, Turn Off
・ Default Value: Turn On
Options (Range/Default Value)
Show the following information
・ Device name
・ MAIN (Phone number MAIN)
・ SUB Number (Phone number SUB)
・ Hardware version
・ Software version
・ Firmware version
・ Web UI version
・ WAN IP Address
・ IMEI
211