SoftBank 304HW User Manual page 144

142
Setting IP Address Filtering
Set whether to apply rules and allow transmissions from Internet through Firewall, based on sender/receiver addresses.
Setting items are as follows:
Item
LAN IP Address
LAN Port
WAN IP Address
WAN Port
Protocol
Status
Options
・ For setting values, see "WEB UI Settings (Setting Range/Default
In Menu List, "Router Setting"
・ If a message asking to enable IP Address Filtering in Firewall setting appears, see
from Firewall then retry.
"Add"
Set source IP address to apply rules; Specify IP address from IP addresses used on LAN
Set source port number to apply rules
Set destination IP address to apply rules
Set destination port number to apply rules
Select protocol to apply rules
Set whether to apply rules
Save or delete rules
"IP Address Filtering"
➜
Description
Value)."
"Firewall Switch" and enable IP address filtering