SoftBank 304HW User Manual page 135

LAN Wi-Fi Advanced Settings
Setting items are as follows:
Item
Country
Channel
Communication standard
Multi-SSID AP isolation
Sleep Mode Settings
Sleep Mode Timer (Min)
Out of service Wi-Fi Automatic
Disconnection
Frequency bandwidth
・ For setting values, see "WEB UI Settings (Setting Range/Default
In Menu List, "LAN Wi-Fi" "Advanced Settings"
➜
Set country where you use WLAN
Set WLAN channel; Only Auto is selected when Internet Wi-Fi is enabled
Set WLAN Communication standard
Set whether to permit interactive communication between devices connected SSID
A and SSID B; This option appears only when Multi-SSID (SSID B) is enabled
Set whether to disable WLAN function automatically when Wi-Fi router does not
connect to WLAN devices; WLAN function is not turned off while charging even if
Sleep Mode Settings is ON
Set auto-timeout time for WLAN function when Sleep Mode Settings is "Enable"
Set whether to automatically disconnect communication with WLAN device out of
network area
Set WLAN channel frequency band width;
Select 20 MHz frequency band or 20 MHz or 40 MHz frequency band
Value)."
Description
133