SoftBank 304HW User Manual page 205

Q . Wi-Fi router operations are unstable
. A Confirm that Wi-Fi router is not used in extreme
temperatures/high humidity/direct sunlight/dusty
areas. Read "Safety Precautions" beforehand for using
under proper environment.
Q . Wi-Fi router goes off
. A Confirm that Wi-Fi router is not used in extreme
temperatures/high humidity/direct sunlight/dusty
areas. Read "Safety Precautions" beforehand for using
under proper environment.
. A Reboot Wi-Fi router and check battery level. If Battery
is low, charge Battery, power on 10 minutes after
charging starts, then check if Wi-Fi router works
properly.
Q . Wi-Fi router is inoperative
. A Operate as follows.
Remove Battery Insert Battery
➜
while
For removing Battery, see "Battery
Q . Connection for voice chat or video chat fails
. A Make sure Wi-Fi router is within the service area.
. A Signal may be weak. Move to where signal is stronger.
. A For UPnP compatible applications, Enable UPnP.
Start WEB UI, "Settings" "Router Setting"
➜
"Enable" for "UPnP" and Click "Apply"
Q . IP address error is shown
. A If IP address of Internet Wi-Fi and IP address of Wi-
Fi router are duplicated, IP address error is shown on
Display of Wi-Fi router.
When using the Internet Wi-Fi function, and connect
to the Internet through the access point of the
public WLAN service, duplicating the IP address
of the LAN Wi-Fi and Internet Wi-Fi may occur and
Internet connection is unavailable in this situation.
Activate WEB UI and change current IP address in
"IP Address" field by selecting "Settings"
Setting" (By default, IP address of Wi-Fi router is set
to "192.168.128.1.") If an IP address error occurs
in this setting, change the third portion of the "128"
in the "192.168.128.1" from the left to another
number.) Accordingly, change starting IP address/
ending IP address in "DHCP" and Click "Apply." When
Wi-Fi router's IP address is changed, changing some
settings of "Router Setting" for functions linked to the
IP address may be required.
Power on after a
➜
Installation."
Select
➜
"Router
➜
Q . Unable to receive TV, TV images are disrupted,
sounds are interrupted
. A Move to a place with good TV reception.
. A Adjust the direction of TV Antenna.
. A Check area setting of Channel Scan.
. A Put Wi-Fi router and mobile devices close.
. A When " インターネッ ト Wi-Fi" on Wi-Fi router is "ON," set
to "OFF."
Q . Unable to activate TV
. A Battery may be low. Activate after charge.
Q . Unable to watch TV
. A Check reception. If reception is poor, move to a place
with good reception. When the TV signal conditions
are poor, connecting a commercially available antenna
cable and the adapter plug such as 75 Ω (mini plug)
⇔ 75 Ω (type F) matching box may improve the signal
conditions.
. A Check Wi-Fi router is powered on.
. A Check smartphone or tablet is connected to Wi-Fi
router via WLAN. To watch TV, connect via WLAN.
. A Check whether TV is already being viewed on another
smartphone or tablet connected to Wi-Fi router via
WLAN. Simultaneously watching is not available.
. A Check " テレビ視聴 " is set to " 有効 ."
. A If " インターネッ ト Wi-Fi" set to "ON," receiving TV may
be affected. Set " インターネッ ト Wi-Fi" to "OFF" while
receiving TV.
. A Bluetooth function on mobile device may affect TV
receiving. Set Bluetooth on mobile device to OFF
while receiving TV.
203