Ten-Tec SSB-CW-AM Instruction Manual page 15

E. What YOU provide
to build and operate
this T-KIT Model 1254 Receiver
REQUIRED, NOT SUPPIIED
9-volt battery (memory backup)
Antenna(s) for bands of interest
thin-diameter rosin core solder
contact cement (to secure panel jack insert, speaker and logo)
RECOMMENDED, NOT SUPPLIED:
masking tape (to protect front panel during final assembly)
headphones with 1/8" stereo plug
MINIMUM TOOLS FOR KIT ASSEMBLY:
25 to 35 watt soldering iron
diagonal cutters or wire "nippers"
needle-nose pliers
utility (household) pliers
adjustable wire stripping tool
insulated alignment tools (may be home made from plastic stirrer, etc.)
medium phillips and slotted screwdrivers
MINIMUM TEST EOUIPMENT:
VOM or DVM for DC voltage measurements
OPTIONAL TEST EOUIPMENT:
Frequency counter
RF signal generator
HELPFUL ADDITIONAL TOOLS
miniature alligator clip jumper leads
desoldering tool
illuminated magnifier
1254 Getting Started - 14