Heating - Skoda Yeti Owner's Manual

Heating

Using the system
Fig. 88 Heating: Control elements
Setting temperature
›
Turn the control dial » Fig. 88
A
›
Turn the control dial to the left to decrease the temperature.
A
Controlling blower
›
Turn the blower switch into one of the positions, 1 to 4, to switch the blower
B
on.
Set heating
Recommended basic settings of the heating controls for the respective operating
modes:
Set-up
Defrosting the windshield and side
windows
Free windshield and side windows
from mist
to the right to increase the temperature.
Setting of the control dial
A
To the right up to the
stop
Desired temperature
›
Turn the blower switch
›
If you wish to shut off the fresh air supply, use the button
section Recirculated air mode.
Regulating the air distribution
›
The direction of the inlet air flow is controlled with air distribution regulator
» page 86.
C
Rear window heater
›
Press the button
dow heater.
Auxiliary heating (parking heating)
›
Press the button
heating and ventilation). Further information
(auxiliary heating and ventilation).
All controls apart from the blower switch
ate position.
The blower should always be on to prevent the windows from misting up.
Note
If the air distribution is positioned towards the windows, the total amount of air is
used to defrost the windows and thus no air will be fed to the footwell. This can
lead to restriction of the heating comfort.
B C

3
  
2 or 3
into position 0 to switch the blower off.
B
. Further information » page 52, Windscreen and rear win-
2
to directly switch on/off the auxiliary heating (auxiliary
3
» page 93, Auxiliary heating
B can be set to any desired intermedi-
Button
1
Open and align with the side win-
Do not switch on
Open and align with the side win-
Do not switch on
Heating and air conditioning system
» page 88, in
1

Air outlet vents 4
dow
dow
£
87