Turn signal and main beam lever
ä
First read and observe the introductory information and safety warn-
ings
on page 44.
The parking light and headlight flasher are also operated with the turn signal and
main beam lever.
Right
and left
turn signal light
›
Push the lever upwards
» Fig. 29
A
›
If you only wish to flash three times (the "convenience turn signal"), briefly
push the lever to the upper or lower pressure point and release again. This fea-
ture can be activated/deactivated via the information display
›
Turn signal for changing lanes - to only flash briefly, move the lever up or down
to the pressure point and hold it in this position.
Main beam
›
Switch on the low beam.
›
Push the lever away from the steering wheel in the direction of arrow
(spring-tensioned position).
›
The main beam is switched off by pulling the lever towards the steering wheel
(spring-tensioned position) in the direction of arrow
Headlight flasher
›
Pull the lever towards the steering wheel (spring-tensioned position) in the di-
rection of arrow
- the main beam and indicator light
D
cluster come on.
Parking light
Description of the operation
» page
50
Using the system
Fig. 29
Turn signal and main beam lever
or downwards
.
B
» page
18.
.
D
in the instrument
46, Parking light
CAUTION
Only use the main beam or the headlight flasher if other road users will not be
dazzled.
Note
The turn signal system only operates when the ignition is switched on. The cor-
■
responding warning light
The turn signal is automatically cancelled after negotiating a curve.
■
The indicator light flashes at twice its normal rate if a bulb for the turn signal
■
light fails.
C
or
in the instrument cluster also flashes.