Route Settings - Jensen VX7020 Operating Instructions Manual

Route Settings

These settings determine how routes will be calculated.
Button
To let the route fit your needs, you can also set which road types are to be
considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total
prohibition. If your destination can only be accessed using some of the excluded
road types, they will be used but only as much as necessary. In this case a
warning icon will be shown on the My Route screen, and the part of the route not
matching your preference will be displayed in a different color on the map.
In the list of road types you can see in how many segments and what total length
of the road type is used in the current route.
Button
124
Description
You can set the type of vehicle you will use to
navigate the route. Based upon this setting, some
of the road types can be excluded from the route,
or some of the restrictions may not be taken into
account in route calculation.
The route calculation can be optimized for different
situations and vehicle types by changing the planning
method. See below for details.
Description
You might need to avoid freeways when you are
driving a slow car or you are towing another vehicle.
Charge roads are pay roads where you can purchase a
pass or vignette to use the road for a longer period of
time. They can be enabled or disabled separately from
toll roads.
iGO primo includes toll roads (pay roads where there
is a per-use charge) in the routes by default. If you
disable toll roads, iGO primo plans the best toll-free
route.
iGO primo includes ferries in a planned route by
default. However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
VX7020