Jensen VX7020 Operating Instructions Manual page 224

VX7020
This feature allows you to receive a warning when
approaching a Road Safety Camera. You must ensure
on your own liability that using this feature is legal in
the country where you intend to use it.
This button is not displayed when GPS position is
not available or if you are in certain countries where
road safety camera warning is prohibited. Even if the
button is available, you are responsible for checking
whether it is legal to use this feature at your location.
Maps may contain driver alert information. Tap this
button to turn on or off these warnings and to set the
distance from the hazard to receive the warning at.
These can be set individually for the different warning
types.
The application can warn you when you approach
road safety cameras like speed cameras or dangerous
areas like school zones or railroad crossings. Tap this
button and set the different alert types individually.
The following alert types are available:
Audio warning: beeps or the name of the alert
type can be played while you are approaching
the camera, or extra alert sounds if you exceed
the speed limit while approaching one of these
cameras.
Visual warning: the type of the alert point, its
distance and the related speed limit appear on
the Map screen while you are approaching one of
these cameras. The distance from the camera is also
displayed.
For some of the alert points, the enforced or expected
speed limit is available. For these points, the audio
alert can be different if you are below or above the
given speed limit.
Only when speeding: The audio alert is only played
when you exceed the given speed limit.
When approaching: The audio alert is always
played. In order to draw your attention, the alert
can be different if you exceed the speed limit.
Road safety cameras are not displayed in the list
when GPS position is not available or if you are in
certain countries where road safety camera warning is
prohibited.
121