Changing The Vehicle Used In Route Planning - Jensen VX7020 Operating Instructions Manual

VX7020

Changing the Vehicle Used in Route Planning

To recalculate the active route for a different vehicle, do as follows. These changes
can also be made in Settings.
1. On the Map screen, tap and then tap .
2. Tap and then tap one of the following:
3. iGO primo recalculates the route optimized for the new vehicle type. The
orange line now shows the new recommended route.
Note!
If you select and you forget to change it back to a vehicle later, the
software warns you when you travel with a speed that is too high for a pedestrian.
You are allowed to switch back instantly to .
101