6.2” double din multimedia receiver dvd / nav / siriusxm-ready / built-in bluetooth / compatible with iphone / compatible with ipod / pandora link / usb / aux in (246 pages)
6.2” double din multimedia receiver dvd/nav/siriusxm-ready/built-in bluetooth/pandora link compatible with iphone/compatible with ipod/usb/aux in (6 pages)
For example, the system does not reflect road detours, closures or construction, some road characteristics (e.g., road surface, slope or grade, weight or height restrictions, etc.), temporary traffic congestion, weather conditions, and similar factors. 128-9291 Jensen VX7020 Navigation Manual.indd 3 3/17/2014 1:25:44 PM...
Errors will be verified and corrected in a future map update. We recommend that you check your map with this system now and every six months to insure you always have the most up-to-date operating system and maps. 128-9291 Jensen VX7020 Navigation Manual.indd 4 3/17/2014 1:25:44 PM...
When the unit is first turned on, you will see the following message, warning you to operate your navigation system appropriately: You must agree to the above notice before using the navigation software. to proceed to the Navigation Menu. 128-9291 Jensen VX7020 Navigation Manual.indd 5 3/17/2014 1:25:44 PM...
Laws in some states prohibit wearing stereo headphones or may prohibit use or placement of a navigation device while operating a motor vehicle. Please contact your state’s Department of Motor Vehicles for information. 128-9291 Jensen VX7020 Navigation Manual.indd 6 3/17/2014 1:25:45 PM...
After the iGO primo software starts, you will see the reminder warning to use your iGO primo software safely and lawfully. Step 3 - Access the Main Menu: Press access the Navigation Menu: 128-9291 Jensen VX7020 Navigation Manual.indd 9 3/17/2014 1:25:45 PM...
Page 10
Tap the button to enlarge the map to the full screen. Step 5 - Map/Guide Along Route Proceed to the highlighted route and drive while the iGO primo software provides guidance to your destination. 128-9291 Jensen VX7020 Navigation Manual.indd 10 3/17/2014 1:25:46 PM...
Page 11
When you are near your destination, the destination is indicated by a checkered flag symbol Refer to the rest of this manual to become more familiar with the many options available on your iGO primo software. 128-9291 Jensen VX7020 Navigation Manual.indd 11 3/17/2014 1:25:46 PM...
• 4GB SD Card with Continental US, Alaska, Hawaii, and Puerto Rico • Latest Map Guarantee (Limited time only - Must be used within 90 days of initial activation) • Compatible with Jensen VX7020 multimedia receiver Specifications • SiRF Prima Processor • Processor Speed 600MHz...
Please keep in mind that although the radio signals of navigation satellites will pass through clouds, glass, plastic, and other lightweight materials, satellite- navigation receivers will not work underground or in some enclosed spaces. 128-9291 Jensen VX7020 Navigation Manual.indd 13 3/17/2014 1:25:47 PM...
(altitude) cannot be calculated. GPS navigation is possible, but the position error may be significant. Altitude information is available, the position is a 3D position. GPS navigation is possible. 128-9291 Jensen VX7020 Navigation Manual.indd 14 3/17/2014 1:25:47 PM...
Source Menu. Navigation voice prompts will be heard automatically, although the navigation map cannot be seen. To view the navigation screen, but continue to listen to the selected source, press the NAV/ WIDE button. 128-9291 Jensen VX7020 Navigation Manual.indd 15 3/17/2014 1:25:47 PM...
3. The Configuration Wizard starts. Tap to continue. 4. Select the language and speaker used for voice guidance messages. Later you can change it in Sound and Warnings settings. 128-9291 Jensen VX7020 Navigation Manual.indd 16 3/17/2014 1:25:47 PM...
Visit www.naviextras.com to register your map. (Limited time only - Must be used within 90 days of initial activation). NOTE: Map MUST be run in your navigation device one time before attempting registration. Follow the instructions on-line. 128-9291 Jensen VX7020 Navigation Manual.indd 17 3/17/2014 1:25:48 PM...
The button itself is a miniature live map that shows your current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to the full screen. 128-9291 Jensen VX7020 Navigation Manual.indd 18 3/17/2014 1:25:48 PM...
Tap the button to change the value. After the change, the new value is shown on the button. Icon Shows status Some icons also information. function as a button. Tap them once. 128-9291 Jensen VX7020 Navigation Manual.indd 19 3/17/2014 1:25:48 PM...
Page 20
Virtual Alphabetic and Each key is a touch keyboard alphanumeric screen button. keyboards to enter text and numbers. 128-9291 Jensen VX7020 Navigation Manual.indd 20 3/17/2014 1:25:49 PM...
(accepting the suggested search result). Finalizing the keyboard entry (opening the list of search results). Finalizing the keyboard entry (saving your input). Canceling the keyboard entry (returning to the previous screen). 128-9291 Jensen VX7020 Navigation Manual.indd 21 3/17/2014 1:25:49 PM...
• Moving the map in map browsing mode: grab the map, and move it in the desired direction. 128-9291 Jensen VX7020 Navigation Manual.indd 22 3/17/2014 1:25:49 PM...
You see colored dots circling around a satellite symbol in the top left corner. The more green dots you see, the closer you are to get the valid GPS position. 128-9291 Jensen VX7020 Navigation Manual.indd 23 3/17/2014 1:25:50 PM...
Page 24
Tap any of the data fields to suppress others and display only the selected one. The data fields are different when you are navigating an active route and when you have no specified destination (the orange line is not displayed). 128-9291 Jensen VX7020 Navigation Manual.indd 24 3/17/2014 1:25:50 PM...
Page 25
Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route. Historical traffic data or traffic patterns are also taken into account whenever such infromation exists. 128-9291 Jensen VX7020 Navigation Manual.indd 25 3/17/2014 1:25:50 PM...
Place of Interest or an alert point, the object will be selected (you see a red circling border around the object), and you can get information about this object or use it as a route point. 128-9291 Jensen VX7020 Navigation Manual.indd 26 3/17/2014 1:25:51 PM...
(turn, traffic circle, exiting freeway, etc.) and its distance from the current position are displayed. A smaller icon shows the type of the second next maneuver if it is near the first one. Otherwise, only the next maneuver is displayed. 128-9291 Jensen VX7020 Navigation Manual.indd 27 3/17/2014 1:25:51 PM...
Page 28
Turn sharp left. Keep left. Continue straight in the intersection. Go left on the traffic circle, 3rd exit (next maneuver). Enter traffic circle (second next maneuver). Enter freeway. Exit freeway. Board ferry. 128-9291 Jensen VX7020 Navigation Manual.indd 28 3/17/2014 1:25:51 PM...
Page 29
All signposts look similar when cruising (when there is no recommended route). When navigating a route, only the signpost that points to the lane(s) to be taken is displayed in vivid colors; all others are darker. 128-9291 Jensen VX7020 Navigation Manual.indd 29 3/17/2014 1:25:52 PM...
Page 30
Elevated roads Complex intersections and vertically isolated roads (such as overpasses or bridges) are displayed in 3D. 3D landmarks Landmarks are 3D artistic or block representations of prominent or well-known objects. 128-9291 Jensen VX7020 Navigation Manual.indd 30 3/17/2014 1:25:52 PM...
Page 31
These streets events and roads are displayed in an alternate color, and small symbols displayed along the route show the type of the traffic event. 128-9291 Jensen VX7020 Navigation Manual.indd 31 3/17/2014 1:25:52 PM...
(the Vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify the map view. 128-9291 Jensen VX7020 Navigation Manual.indd 32 3/17/2014 1:25:52 PM...
Page 33
2D or 3D view Tap this button to switch between the 3D perspective and 2D top- down map view modes. 128-9291 Jensen VX7020 Navigation Manual.indd 33 3/17/2014 1:25:53 PM...
Page 34
Cursor as a Favorite destination, or searching for Places around the Cursor. Select destination Tap this button to select the Cursor as a new destination. The route is automatically calculated. 128-9291 Jensen VX7020 Navigation Manual.indd 34 3/17/2014 1:25:53 PM...
The menu will also close if you initiate simple controls like muting the device. In other cases tapping a button will open a new screen with options. Most of these functions are shortcuts. They are accessible from the menu system. 128-9291 Jensen VX7020 Navigation Manual.indd 35 3/17/2014 1:25:53 PM...
Page 36
My Route / Edit Route editing function. This button opens the route More / Settings / Route related settings. Settings This button opens the map More / Settings / Map related settings. Settings 128-9291 Jensen VX7020 Navigation Manual.indd 36 3/17/2014 1:25:54 PM...
Page 37
Tap the top of the maneuvers (the itinerary). Map screen during navigation. With this function you can My Route / More / Save save the active route for later Route use. 128-9291 Jensen VX7020 Navigation Manual.indd 37 3/17/2014 1:25:56 PM...
Page 38
Simulate Navigation the active route. This button opens the GPS Tap the top of the Map Information screen with screen when there is no satellite position and signal GPS reception. strength information. 128-9291 Jensen VX7020 Navigation Manual.indd 38 3/17/2014 1:25:57 PM...
• In the middle of the screen you can see whether the position is current, or the time left since it was last updated. • Address details (when available) of the current position are also displayed at the bottom. 128-9291 Jensen VX7020 Navigation Manual.indd 39 3/17/2014 1:25:57 PM...
Page 40
: Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Gas stations Tap any of the buttons, select a Place from the list, and navigate to it. 128-9291 Jensen VX7020 Navigation Manual.indd 40 3/17/2014 1:25:58 PM...
• the exact address, including house number • the center of a city/town • an intersection • the midpoint of a street • any of the above, starting the search with the ZIP code. 128-9291 Jensen VX7020 Navigation Manual.indd 41 3/17/2014 1:25:58 PM...
Page 42
Start entering the name of the city/town on the keyboard. c. Find the city/town you need: • The most likely city/town name is always shown in the input field. To accept it, tap 128-9291 Jensen VX7020 Navigation Manual.indd 42 3/17/2014 1:25:59 PM...
Page 43
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 43 3/17/2014 1:25:59 PM...
Page 44
7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 44 3/17/2014 1:26:00 PM...
Page 45
Favorites first: tap then , give a name for the new Favorite, and tap to save the location. The map with the destination returns automatically. Now you can start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 45 3/17/2014 1:26:00 PM...
Page 46
Start entering the name of the city/town on the keyboard. c. Find the city/town you need: • The most likely city/town name is always shown in the input field. To accept it, tap 128-9291 Jensen VX7020 Navigation Manual.indd 46 3/17/2014 1:26:01 PM...
Page 47
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 47 3/17/2014 1:26:03 PM...
Page 48
7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 48 3/17/2014 1:26:03 PM...
Page 49
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 49 3/17/2014 1:26:04 PM...
Page 50
Start entering the street name on the keyboard. c. Find the street you need: • The most likely street name is always shown in the input field. To accept it, tap 128-9291 Jensen VX7020 Navigation Manual.indd 50 3/17/2014 1:26:04 PM...
Page 51
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 51 3/17/2014 1:26:05 PM...
Page 52
7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 52 3/17/2014 1:26:05 PM...
Page 53
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 53 3/17/2014 1:26:06 PM...
Page 54
7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 54 3/17/2014 1:26:07 PM...
Page 55
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 55 3/17/2014 1:26:07 PM...
Page 56
6. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 56 3/17/2014 1:26:08 PM...
Page 57
7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 57 3/17/2014 1:26:09 PM...
Page 58
• If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the city/ town from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 58 3/17/2014 1:26:09 PM...
Page 59
7. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 59 3/17/2014 1:26:10 PM...
Page 60
• The most likely ZIP code is always shown in the input field. To accept it, tap • If the desired number does not show up, open the list of results by tapping . Select the ZIP code from the list. 128-9291 Jensen VX7020 Navigation Manual.indd 60 3/17/2014 1:26:10 PM...
Page 61
Enter the house number on the keyboard. (To enter letters, tap c. Tap to finish entering the address. (If the entered house number cannot be found, the midpoint of the street is selected as the destination.) 128-9291 Jensen VX7020 Navigation Manual.indd 61 3/17/2014 1:26:11 PM...
Page 62
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 62 3/17/2014 1:26:11 PM...
Page 63
‘PI A’ to obtain Pine Avenue and skip all Pine Streets and Pickwick Roads. You can also search in ZIP codes. As ZIP codes consist of only a few characters, this is usually faster than entering the name of the city/town. 128-9291 Jensen VX7020 Navigation Manual.indd 63 3/17/2014 1:26:11 PM...
2. Using the keyboard, start entering the name of the Place. 3. After entering a few letters, tap to open the list of Places with names containing the entered character sequence. 128-9291 Jensen VX7020 Navigation Manual.indd 64 3/17/2014 1:26:12 PM...
Page 65
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 65 3/17/2014 1:26:12 PM...
Page 66
• If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. 128-9291 Jensen VX7020 Navigation Manual.indd 66 3/17/2014 1:26:13 PM...
Page 67
8. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 67 3/17/2014 1:26:13 PM...
Page 68
9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 68 3/17/2014 1:26:14 PM...
Page 69
This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants. (The result list will be ordered by the length of the necessary detour.) 128-9291 Jensen VX7020 Navigation Manual.indd 69 3/17/2014 1:26:14 PM...
Page 70
Places around the selected location or along the route. 7. Select one of the Place subcategories (e.g. Hotel or Motel) or to list all Places in the selected main category around the selected location or along the route. 128-9291 Jensen VX7020 Navigation Manual.indd 70 3/17/2014 1:26:15 PM...
Page 71
13. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 71 3/17/2014 1:26:16 PM...
Page 72
14. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 72 3/17/2014 1:26:16 PM...
Page 73
This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming gas stations or restaurants. (The result list will be ordered by the length of the necessary detour.) 128-9291 Jensen VX7020 Navigation Manual.indd 73 3/17/2014 1:26:16 PM...
Page 74
Places, or select one of the main Place categories (e.g. Accommodation) to search in. 7. Tap to search in the selected Place category or select one of the Place subcategories (e.g. Hotel or Motel) to search in. 128-9291 Jensen VX7020 Navigation Manual.indd 74 3/17/2014 1:26:17 PM...
Page 75
11. (Optional) The Places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. If you need to reorder the list, tap 128-9291 Jensen VX7020 Navigation Manual.indd 75 3/17/2014 1:26:17 PM...
Page 76
15. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 76 3/17/2014 1:26:18 PM...
Page 77
(or around the last known position if the current position is not available): • : Car repair and roadside assistance services • : Medical and emergency services • : Police stations • : Gas stations 128-9291 Jensen VX7020 Navigation Manual.indd 77 3/17/2014 1:26:19 PM...
Page 78
The name and address of the Place is displayed at the top of the screen. 7. (Optional) Tap to see the details of the selected Place. Tap to return to the map. 128-9291 Jensen VX7020 Navigation Manual.indd 78 3/17/2014 1:26:19 PM...
Page 79
9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 79 3/17/2014 1:26:20 PM...
6. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 80 3/17/2014 1:26:20 PM...
4. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 81 3/17/2014 1:26:21 PM...
Page 82
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 82 3/17/2014 1:26:21 PM...
4. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 83 3/17/2014 1:26:22 PM...
Page 84
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 84 3/17/2014 1:26:22 PM...
4. A full screen map appears with the selected point in the middle. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 128-9291 Jensen VX7020 Navigation Manual.indd 85 3/17/2014 1:26:23 PM...
Page 86
5. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey. 128-9291 Jensen VX7020 Navigation Manual.indd 86 3/17/2014 1:26:23 PM...
4. You can enter the latitude and longitude values in any of the following formats: decimal degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds. 5. (Optional) If necessary, tap then and enter the coordinate in UTM format. 6. When finished, tap 128-9291 Jensen VX7020 Navigation Manual.indd 87 3/17/2014 1:26:25 PM...
Page 88
8. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. to modify route parameters, or tap and start your journey 128-9291 Jensen VX7020 Navigation Manual.indd 88 3/17/2014 1:26:26 PM...
GPS position. 5. Tap to select the destination. 6. The Destination menu appears and you can select the destination of the route the same way as described in the previous sections. 128-9291 Jensen VX7020 Navigation Manual.indd 89 3/17/2014 1:26:34 PM...
Page 90
7. When the new destination is selected, the list returns. 8. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. 128-9291 Jensen VX7020 Navigation Manual.indd 90 3/17/2014 1:26:37 PM...
Navigation menu. 2. In the Navigation menu, tap 3. Tap . The active route is displayed in its full length on the map together with additional information and controls. 128-9291 Jensen VX7020 Navigation Manual.indd 91 3/17/2014 1:26:37 PM...
• Tap to append the newly selected destination at the end of the route. The other destinations of the route remain intact. The previous final destination is now the last waypoint. 128-9291 Jensen VX7020 Navigation Manual.indd 93 3/17/2014 1:26:38 PM...
If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 3. If you already have a route, tap If you are starting a new route, tap 128-9291 Jensen VX7020 Navigation Manual.indd 94 3/17/2014 1:26:39 PM...
Page 95
7. The map returns with a transparent Vehimarker (showing that there is no GPS reception). If an active route already existed, it is now recalculated starting from the selected location. 8. To return to normal navigation, tap 128-9291 Jensen VX7020 Navigation Manual.indd 95 3/17/2014 1:26:46 PM...
• Tap to modify the start point of the route. • Tap to reorder the list. You can do it manually or you can let the application optimize the route for you. 128-9291 Jensen VX7020 Navigation Manual.indd 96 3/17/2014 1:26:46 PM...
(If you have a route with waypoints, you need to tap until all waypoints are deleted.) • In the Navigation menu, tap and then tap . The active route is deleted with all its waypoints. 128-9291 Jensen VX7020 Navigation Manual.indd 97 3/17/2014 1:26:47 PM...
2. Tap 3. Tap 4. You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. 128-9291 Jensen VX7020 Navigation Manual.indd 98 3/17/2014 1:26:48 PM...
Do as follows: If you are on the Map screen, tap to return to the Navigation menu. 2. In the Navigation menu, tap 128-9291 Jensen VX7020 Navigation Manual.indd 99 3/17/2014 1:26:48 PM...
Page 100
7. Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. iGO primo recalculates the route. The orange line now shows the new recommended route. 128-9291 Jensen VX7020 Navigation Manual.indd 100 3/17/2014 1:26:50 PM...
You should check whether you are allowed to use carpool lanes before enabling this road type. 3. Tap to confirm the changes. iGO primo recalculates the route. The orange line now shows the new recommended route. 128-9291 Jensen VX7020 Navigation Manual.indd 102 3/17/2014 1:26:54 PM...
4. (Optional) Using the keyboard, you can change the name offered for the Favorite. Tap to enter numbers or symbols. 5. Tap to save the location as a new Favorite destination. 128-9291 Jensen VX7020 Navigation Manual.indd 103 3/17/2014 1:26:59 PM...
4. On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. 5. Tap to save the location as a new alert point. 128-9291 Jensen VX7020 Navigation Manual.indd 104 3/17/2014 1:27:00 PM...
4. On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. 5. Tap to save the changes to the alert point. 128-9291 Jensen VX7020 Navigation Manual.indd 105 3/17/2014 1:27:00 PM...
4. Scroll down the list and tap . The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route. 128-9291 Jensen VX7020 Navigation Manual.indd 106 3/17/2014 1:27:01 PM...
Page 107
: Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. 6. Tap to stop the simulation. 128-9291 Jensen VX7020 Navigation Manual.indd 107 3/17/2014 1:27:01 PM...
Page 108
VX7020 This page intentionally left blank. 128-9291 Jensen VX7020 Navigation Manual.indd 108 3/17/2014 1:27:01 PM...
GPS position a few minutes before sunrise, when the sky has already turned bright, and a few minutes after sunset, before it becomes dark. 128-9291 Jensen VX7020 Navigation Manual.indd 109 3/17/2014 1:27:01 PM...
• A private road is used only if the destination is there. • Speed limits are not used in route calculation and an average walking speed is used when calculating the estimated time of arrival. 128-9291 Jensen VX7020 Navigation Manual.indd 110 3/17/2014 1:27:01 PM...
Page 111
• Maneuver restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for taxis is allowed. • Private roads, resident-only roads and walkways are excluded from routes. 128-9291 Jensen VX7020 Navigation Manual.indd 111 3/17/2014 1:27:02 PM...
Page 112
Real-time Traffic events are also taken into account and sometimes greatly modify the route. iGO primo automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route. 128-9291 Jensen VX7020 Navigation Manual.indd 112 3/17/2014 1:27:02 PM...
CO2 emission differences between your selected route and the Green route are also shown on this screen: Tap the field with these details to switch the route to Green immediately. 128-9291 Jensen VX7020 Navigation Manual.indd 113 3/17/2014 1:27:02 PM...
• Visual warning: the current speed limit is shown on the map when you exceed it (for example: You can also choose to see the speed limit sign on the map all the time. 128-9291 Jensen VX7020 Navigation Manual.indd 114 3/17/2014 1:27:03 PM...
Your current location and route points are marked on the map. Tap the Details button to see the exact sunrise and sunset times for all your route points (your current location, all waypoints and the final destination). 128-9291 Jensen VX7020 Navigation Manual.indd 116 3/17/2014 1:27:04 PM...
Page 117
The About section provides you with product information. Read the Software and Database End User License Agreement, look up content licenses or check the unique identifier of the software. You can also access program usage statistics. 128-9291 Jensen VX7020 Navigation Manual.indd 117 3/17/2014 1:27:04 PM...
These settings determine how Green routes will be calculated. They are also used to display the cost and CO2 emission of routes. 128-9291 Jensen VX7020 Navigation Manual.indd 118 3/17/2014 1:27:04 PM...
Page 119
Modify the basic software parameters set during the initial setup process. Delete all saved data and reset all settings to their factory defaults. 128-9291 Jensen VX7020 Navigation Manual.indd 119 3/17/2014 1:27:04 PM...
If you prefer to see the speed limit sign on the map all the time (normally it is shown only if your speed exceeds it), you can set it here. 128-9291 Jensen VX7020 Navigation Manual.indd 120 3/17/2014 1:27:05 PM...
Page 121
Road safety cameras are not displayed in the list when GPS position is not available or if you are in certain countries where road safety camera warning is prohibited. 128-9291 Jensen VX7020 Navigation Manual.indd 121 3/17/2014 1:27:05 PM...
Page 122
Controls for each sound type: Button Description Volume Slider Adjusts the volume of the related sound. Use the switch to mute the related sound. The slider becomes inactive. Tap again to re-enable. 128-9291 Jensen VX7020 Navigation Manual.indd 122 3/17/2014 1:27:05 PM...
However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries. 128-9291 Jensen VX7020 Navigation Manual.indd 124 3/17/2014 1:27:05 PM...
Page 125
• A private road is used only if the destination is there. • Speed limits are not used in route calculation and an average cycling speed is used when calculating the estimated time of arrival. 128-9291 Jensen VX7020 Navigation Manual.indd 125 3/17/2014 1:27:06 PM...
Page 126
Results in a route with fewer turns and no difficult maneuvers. With this option, you can make iGO primo to take, for example, the freeway instead of a series of smaller roads or streets. 128-9291 Jensen VX7020 Navigation Manual.indd 126 3/17/2014 1:27:06 PM...
Enter the average fuel price for travel cost calculation. If necessary, tap select to change the measurement unit. If the selected routing method is not Green, you can have the best green alternative on screen when selecting the route. 128-9291 Jensen VX7020 Navigation Manual.indd 127 3/17/2014 1:27:06 PM...
Separate icons can be used for car, pedestrian and the other vehicles. Show or suppress 3D landmarks, 3D artistic or block representations of prominent or well-known objects. 128-9291 Jensen VX7020 Navigation Manual.indd 128 3/17/2014 1:27:06 PM...
Page 129
• Tap the name of the Place category to open the list of its subcategories. • Tap to save the current Place visibility set or to load a previously saved one. Here you can also revert to the default visibility settings. 128-9291 Jensen VX7020 Navigation Manual.indd 129 3/17/2014 1:27:07 PM...
The red arrow represents your current position and moves up as you travel. Waypoints and Traffic events are also displayed on the line. 128-9291 Jensen VX7020 Navigation Manual.indd 130 3/17/2014 1:27:07 PM...
12 and 24 hours time display and the various international date display formats. By default, time zone is taken from the map information and adjusted by your current location. Here you can set time zone and daylight saving manually. 128-9291 Jensen VX7020 Navigation Manual.indd 131 3/17/2014 1:27:07 PM...
GPS receiver, can be saved together with trip logs. They can later be displayed on the map. You can let the application save the track log whenever it saves a trip. 128-9291 Jensen VX7020 Navigation Manual.indd 132 3/17/2014 1:27:07 PM...
You can use digital maps interactively: you can zoom in and out (increase or decrease the scale), you can tilt them up and down, and rotate them left and right. In GPS-supported navigation, digital maps facilitate route planning. 128-9291 Jensen VX7020 Navigation Manual.indd 133 3/17/2014 1:27:07 PM...
Page 134
This position marker can be replaced with different vehicle and pedestrian symbols. You can even specify different Vehimarkers for different route types (depending on which vehicle type is selected for route calculation). 128-9291 Jensen VX7020 Navigation Manual.indd 134 3/17/2014 1:27:07 PM...
Software Product. 4.4 Error corrections, additions, updates used by the User following the conclusion of this Agreement shall also be deemed parts of the Software Product. 128-9291 Jensen VX7020 Navigation Manual.indd 135 3/17/2014 1:27:07 PM...
Page 136
7.1 The User is not entitled 7.1.1 to duplicate the Software Product (to make a copy thereof ); 7.1.2 to lease, rent or lend it or to transfer it to a third person for any reason; 128-9291 Jensen VX7020 Navigation Manual.indd 136 3/17/2014 1:27:08 PM...
Page 137
Software Product not being applicable for any defined purpose, or due to the error or incompatibility of the Software Product with any other system, device or product (e.g. software or hardware). 128-9291 Jensen VX7020 Navigation Manual.indd 137 3/17/2014 1:27:08 PM...
Page 138
The User hereby acknowledges that the contents and services provided by third parties may only be used at the risk of the User and for the personal benefit of the User. 128-9291 Jensen VX7020 Navigation Manual.indd 138 3/17/2014 1:27:08 PM...
Page 139
Software Product storage media. 10.3 Collected data is transmitted, stored and handled anonymously and no connection of the data with the User shall be established by Licensor or any third party. 128-9291 Jensen VX7020 Navigation Manual.indd 139 3/17/2014 1:27:08 PM...