Modifying The Route; Selecting A New Destination When Already Having A Route - Jensen VX7020 Operating Instructions Manual

VX7020

MODIFYING THE ROUTE

When navigation is already started, there are several ways to modify the active
route. The following sections show some of those options.
Selecting a New Destination When Already Having a
Route:
New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination as
described in the above sections, the application will ask you whether to start a
new route, add a new waypoint (intermediate destination) to the route or append
the newly selected destination at the end of the current route.
Tap to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
Tap to add the newly selected location as an intermediate destination
to your route. The other destinations of the route remain intact. Note: the new
waypoint is placed among destinations to keep the route optimal. To decide
where a waypoint should appear, use the Edit Route feature.
Tap to append the newly selected destination at the end of the route. The
other destinations of the route remain intact. The previous final destination is
now the last waypoint.
93