Description Of The Main Components; Description Of The Main Components - Toshiba FC15 Operator's Manual

1. DESCRIPTION OF THE MAIN COMPONENTS

When the optional staple sorter MG-2014 is attached to the copier, you can select the sort, group
or staple mode. Non-sort is automatically selected as the default mode.
Non-sort bin
In the non-sort mode, copies exit
into this bin. However, they will
also go into the sort bins when
more than 250 sheets are copied
or depend-ing upon the size of
paper selected.
Sort bins (Bins "1" ~ "20")
In the sort or group mode, all
copies exit
However, when more than 250
copies are set in the non-sort
mode, some of them will also
enter these bins.
Note: See page 162 for the details of the staple sorter specification.
122
into these bins.
Stapler cover*
key*
STAPLE
The lamp inside the key
lights when stapling
possible or while stapling is
in progress.
Stapler*
Staple cartridge*
is