Removing Rear Wheel - BMW F 800 GS Rider's Manual

Tighten mounting screws 1
with appropriate torque.
Brake caliper on spring
forks
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Firmly compress spring forks
several times.
Tighten axle clamping screw 2
with specified torque.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
with BMW Motorrad ABS
Insert ABS sensor into hole
and install screw 1.
Remove auxiliary stand if nec-
essary.

Removing rear wheel

Place motorcycle on a suitable
auxiliary stand.
OE
with center stand
Make sure ground is level and
firm and place motorcycle on
its center stand.
OE
8
97
z