Installing Rear Wheel - BMW F 800 GS Rider's Manual

8
98
Remove screw 1 of speed sen-
sor and take speed sensor out
of holder.
z
Remove axle nut 2.
Loosen lock nuts 3 on left and
right by turning counterclock-
wise.
Loosen adjusting screws 4 on
left and right by turning clock-
wise.
Remove adjusting plate 5 and
slide axle as far as possible to-
ward inside.
Remove quick-release axle 6
and take out adjusting plate 7.
Roll rear wheel as far forward
as possible and remove
chain 8 from chain sprocket.
Roll rear wheel toward rear out
of swinging arm.
The chain sprocket and
the spacer sleeves on the
left and right are loosely inserted
in the wheel. When removing,
make sure that these parts are
not damaged or lost.

Installing rear wheel

Roll rear wheel into swinging
arm while guiding brake disk
between brake pads.