Advertisement
8
Volume Control:
the balanced and unbalanced output jacks on the rear panel. Turn the knob
clockwise fully for the max volume, and turn the knob counterclockwise fully
for the min volume.
9
Antenna Input Sockets:
For optimal radio reception antennas should be placed vertically. You can
fold the antennas inward for convenience of transportation.
THE REAR PANEL
1
Audio Output XLR:
we forgot to tell you that although your MOD-16 system is wireless, you
still need to connect the receiver to your Mixing Desk and to a wall plug!)
2
Audio Output Jack:
1/4" mono jack.
3
DC Input:
4
Squelch:
5
LOW-MID-HIGH Key:
Output level of your transmitter:
LOW = -12dB
MID = -6dB
HI = 0dB
3.2 THE MOD16H Handheld Transmitter
6
7
This knob sets the audio signal level outputted through
Includes 2 antennas to secure the Diversity function.
3
1
To connect a balanced cable with XLR connector (Yes,
To be used with an unbalanced cable and standard
You can connect the supplied Adapter to this socket.
The job of a squelch circuit is to reduce audible noise.
By pressing this key you can change the Audio
5
4
2
5
2
4
3
5
1
Advertisement
