Advertisement
Belt Clip: It is a detachable belt clip for easy carry during the live applications.
7
Antenna: It is a flexible antenna. To get effective transmission, never cover the
8
antenna with hand, clothes, etc during the operation, and always position the
transmitter nearby the receiver.
OK, if so far you remember all the functions and features of your Mod16 System
you are ready to operate the Unit. Let's start from the Receiver:
4. Operation
4.1 For the MOD-16PRO, PLL UHF Diversity Receiver
First, turn the Unit ON. With your Transmitter in ON position, check the Channel
Number indicated on the Transmitter display. Now, press the UP/DOWN keys until
the same value is shown on the double digit display of your MOD-16 Receiver. Once
Receiver and Transmitter are synchronized the LED Meters for Audio signal and
Radio frequency will light up.
- Audio Output Level
The volume control knob adjusts the amount of audio signal to be sent to the
mixing desk through the balanced or unbalanced output sockets on the rear
panel. Turn the volume knob clockwise for maximum output and counterclockwise
for minimum output volume.
- Squelch Control:
A squelch circuit is responsible to minimize audible noise during operation.
Such circuit will mute the Receiver every time the incoming audio signal
drops below a certain threshold. You must use the squelch control with
maximum care. If the threshold is too high the squelch circuit will not only
cut the noise but also mute certain low-level audio signals. Please experiment
various threshold levels before Live operation and choose the most appropriate
for your event.
8
Advertisement
