Advertisement
3. Control Elements:
Ok, enough with numbers. Let's start to familiarize with your MOD-16 System.
First of all, the MOD-16PRO Receiver:
3.1 MOD-16PRO, PLL UHF Diversity Receiver
FRONT PANEL
1
Power Switch:
don't switch the Power ON!
2
UP/DOWN Keys:
once the MENU is activated.
3
DISPLAY:
on your MOD-16PRO. The same number must appear on your Transmitter
for proper functioning.
4
AF Display:
LED lights up the incoming audio signal is optimized and will not present
distortion. If the "+6" LED lights up, the audio signal is overloaded and
you will hear distortion. If only the "-12" LED lights up only 10% of the
available signal reaches the Receiver. For optimal sound reproduction,
please do not exceed the "0" level.
5
RF Display:
is granted when all the LEDs light up. If no LED lights up, there is minimum
or no radio signal coming into the Receiver. If only a few LEDs light up you
may still operate the system but it means you are in a poor reception mode
due to Antenna positioning, distance in between Receiver and Transmitter.
6
MENU Key (SET):
above.
7
Modeller:
to perform. There are total 16 options for you. Please refer to 5. Modelling
Technology for Microphones for further details.
9
4
5
We are afraid you can not use the MOD-16R if you
You can adjust the right values through these two keys
This double digit display shows you the number of channel operating
It shows the level of the incoming audio signal. When "0"
It shows the level of the incoming radio signal. Optimum reception
Via this key you can activate the desired function described
Adjust this knob to select the right modelling preset you wish
3
2
7
6
4
1 9
8
Advertisement
