Advertisement
4.2 For the MOD-16H/16P transmitters
And now that you know how to operate your Mod16PRO Receiver, let's learn how
to use the MOD-16 Transmitters. The following instructions apply both to the
handheld version and to the bodypack version.
There are 2 keys on the Transmitter labelled CH/ON and SELECT.
Press the CH/ON key for a few seconds and the transmitter will be powered ON.
At this point the blue back lighted display will show:
The channel at which the unit is operating
The Battery Status
Preset Channel
With the Transmitter switch ON you can slightly press the CH/ON key
again and you will access to the following parameters:
Preset Channel
RF power level
Lock/Unlock
In your Transmitter there are 100 frequencies. Each Group according
to EMC regulations.
To select a frequency you must first switch your Transmitter ON by
pressing the CH/ON key for a few seconds until you hear the beep
and the blue display is lighted. Then press the CH/ON key again slightly
and you will access the CHANNEL menu. At this point use the SELECT
key to change the
automatically saved in a few seconds and the display will go back to
the main menu showing the operating frequency.
frequency
value from 1 to 99. Your setting will be
9
Remaining battery life
Advertisement
