Security Menu; Boot Menu - BenQ Joybook S32 Series User Manual

c. CPU Power Saving: This item determines if the CPU
supports enhanced C-state, which determines the
power management of CPU.
If you are not familiar with the items in Advanced Configuration
menu, you are advised to keep the default.

Security menu

The Security menu contains the security settings, which
safeguard your system against unauthorized use.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
warranty documentation. Should you happen to forget or mislay
the password once set, you will be greatly inconvenienced in
gaining subsequent access to your Joybook.
• Set Supervisor Password: This set of password controls access
to the whole BIOS setup menu. It must be set before User
Password can be set. When typing the password, first make
sure Num Lock is off, and then type your password in the
entry fields and press <Enter>. Confirm your password by
typing it again and pressing <Enter>.
• Set User Password: This set of password controls access to part
of the BIOS setup menu.
• Password on boot: This item determines if a password will be
prompted during system boot. When this item is enabled, the
password is always required to boot the computer.
If Set Supervisor Password and Set User Password are both set,
you can enter either one of them during the password prompt.
To have full privileges in BIOS setup, enter Supervisor
Password.

Boot menu

The Boot menu contains the boot configuration settings of the
system. A list of devices will be displayed under Boot Sequence.
• Use < > or < > to select a device, and then press <F6> to
move it up or <F5> to move it down.
• To select a boot device manually, press the <F9> key when the
BenQ logo appears on the screen during system startup. The
Boot Menu will appear. Use the up and down arrow keys ( ,
) to select a boot device, and then press <Enter> to confirm.
Using BIOS setup 41