Main Menu; Security Menu; Boot Menu; Exit Menu - BenQ Joybook S73 series User Manual

Enter Brings up the sub-menu when available.
Opens or closes the option window when
an item is selected.
Tab Jumps from one item to another.
Esc
Exits BIOS Setup.
Returns to the previous menu if in a sub-
menu.
Closes the options window if one is open.

Main Menu

The Main menu contains the basic configuration settings of the system,
including information about "System BIOS Version", "KBC Version",
"System Time", "System Date", "Primary Master", "Secondary Master",
"CPU Type", "Physical Memory", "Digital TV", and "Enable CPU State
support".
• System Time: allows you to set the time of the system. Use <+> or <->
to increase or decrease the value and then press Enter to change the
next value.
• System Date: allows you to set the date of the system. Use <+> or <-> to
increase or decrease the value and then press Enter to change the next
value.
• Digital TV: This item controls the functionality of the Digital TV. For
power-saving, the default setting is Disabled.
• Enable CPU State support: This item determines if the CPU supports
enhanced C-state C4.

Security Menu

The Security menu contains the security settings, which safeguard your
system against unauthorized use.
• Set Supervisor Password: This set of password controls access to the
whole BIOS Setup menu. It must be set before Set User Password can be
set. When typing the password, first make sure that Num Lock is off,
and then type your password in the entry fields and press Enter.
Confirm your password by typing it again and pressing Enter.
• Set User Password: This set of password controls access to part of the
BIOS Setup menu.
• Password On Boot: This item determines if a password will be prompted
during system boot. When this item is enabled, the password is always
required to boot the computer.
24 Using BIOS Setup
If Set Supervisor Password and Set User Password are both set, you can
enter either one of them during the password prompt. To have full
privileges in BIOS Setup, enter Set Supervisor Password.

Boot Menu

The Boot menu sets the sequence of the devices to be searched for the
operating system.
Boot Sequence: sets the sequence of boot devices. The system will try to
boot from the first device but if it is not available, will try the next boot
device.
Use <+> to move the device up or use <-> to move the device down.
To select a boot device manually, press the F9 key when the BenQ logo
appears on the screen during Joybook startup. The boot menu will
appear. Use the up and down arrow keys ( , ) to select a boot device and
then press the Enter key to confirm.

Exit Menu

The Exit menu displays ways of exiting BIOS Setup. After finished with
your settings, you must save and exit so that the new settings can take
effect.
Exit Saving Changes: saves the changes you have made and exits BIOS
•
Setup. After finished with your settings, you must save and exit so that
the new settings can take effect.
• Exit Discarding Changes: exits BIOS Setup without saving the changes
you have made.
• Load Setup Defaults: loads factory default values for all the items.
• Discard Changes: cancels all changes since last save, without exiting the
BIOS Setup utility.
• Save Changes: Save changes without exiting the BIOS Setup utility.