Specifications - Sherwood R-904 Operating Instructions Manual

R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 43

Specifications

■AmPLIFIER SECTION
• Power output, stereo mode, 6 Ω, THD 0.5%, 1 kHz
• Total harmonic distortion at -3 dB, 6 Ω, 1 kHz
• Input sensitivity/impedance
Line (CD, AUX, VIDEO)
• Signal to noise ratio, IHF "A" weighted
Line (CD, AUX, VIDEO)
• Frequency response
Line (CD, AUX, VIDEO), 20 Hz ~ 70 kHz
• Bass/Treble control, 100 Hz/10 kHz
• Surround mode, only channel driven
Front power output, 6 Ω, 1 kHz, THD 0.7 %
Center power output, 6 Ω, 1 kHz, THD 0.7 %
Surround power output, 6 Ω, 1 kHz, THD 0.7 %
Surround back / ROOM2 power output, 6 Ω, 1 kHz, THD 0.7 %
■DIGITAL AUDIO SECTION
• Sampling frequency
• Digital input level
Coaxial, 75 Ω
Optical, 660 nm
■VIDEO SECTION
• Video format
• Input sensitivity(=Output level), 75 Ω
Video (Composite(normal))
Component video (R-Y signal)
• HDMI connector
■Fm TUNER SECTION
• Tuning frequency range
• Usable sensitivity, THD 3%, S/N 26 dB
• 46 dB quieting sensitivity, mono/stereo
• Signal to noise ratio, 65 dBf, mono/stereo
• Total harmonic distortion, 65 dBf,1 kHz, mono/stereo
• Frequency response, 30 Hz~15 kHz
• Stereo separation, 1 kHz
• IF rejection ratio
■GENERAL
• Power supply
• Power consumption
• Dimensions (W× H× D, including protruding parts)
• Weight (Net)
Note: Design and specifications are subject to change without notice for improvements.
| 200 mV/47kΩ
| 100 dB
|
| ±10 dB
| 32, 44.1, 48, 96, 192 kHz
| 0.5 Vp-p
| -15 ~ -21 dBm
| PAL
| 1 Vp-p
| 0.5 Vp-p
(B-Y signal) | 0.5 Vp-p
(Y signal) | 1.0 Vp-p
| 19 pin
| 87.5~108 mHz
| 9 dBf
| 20.2 / 45.3 dBf
|
| ±3 dB
| 30 dB
| 70 dB
| 230 V ~ 50 Hz
| 120 W
| 4.53 kg (10.0 Ibs)
| 2× 100 W
| 0.5%
+0, -3 dB
| 100 W / 100 W
| 100 W
| 100 W / 100 W
| 100 W / 100 W
70 / 65 dB
| 0.8 / 1.0 %
| 430 x 72 x 306 mm(17 x 2-7/8 x 12 inches)
43