Universal Remote Controls - Sherwood R-904 Operating Instructions Manual

R-904(G)_ENG_091014:R-904(G) 2009-11-11 오후 12:05 페이지 12

Universal Remote Controls

This universal remote control can operate not only this receiver but also most popular brands of audio and video components
such as iPod docks, CD players, tape decks, TVs, BD/DVD players, satellite receivers, cable boxes, etc.
• To operate 7 components other than this receiver, you should enter the setup code for each component.
(For details, refer to "USING FUNCTIONS OF REMOTE CONTROL" on page 15.)
• The numbered buttons on the remote control have different functions in different device modes. For details, refer to
"FUNCTION TABLE of the NUMBERED BUTTONS" on the next page.
POWER ON button
ROOM2 VOLUME
UP/DOWN(∧/∨) buttons
SELECTOR buttons
TUNING UP/DOWN(+/-) buttons
DIMMER button
DISPLAY button
AUDIO ASSIGN button
SURROUND MODE UP/DOWN (>/<)
NUMERIC (0~9, +10)/
INPUT SELECTOR buttons
To select the desired input
source of TUNER~VIDEO 2
ROOM2 INPUT
MUTE button
buttons
LED
STANDBY button
DEVICE buttons
To operate the desired component with
this remote control, first select the
corresponding DEVICE button.
ROOM2 button
VOLUME UP/DOWN(+/-) buttons
PRESET UP/DOWN(+/-) buttons
SETUP button
CURSOR CONTROL, ENTER
(/SEARCH MODE, SELECT <, >)
buttons
The functions in "( )" are regional option
for Europe, etc.
RETURN button
STEREO button
SOUND PARAMETER button
SLEEP button
MACRO(M1~M3) buttons
To operate a macro function,
press the corresponding
MACRO button.
12