At The End Of A Wash Program; Rinse Aid And Salt Indicator Neons; Saving Energy Using Your Dishwasher; Program Table - Baumatic BDI632 Instruction Manual

o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.

At the end of a wash program

o When the wash program is finished a buzzer will sound.
o Open the door of the appliance.
o Use the ON/OFF button to switch the dishwasher off and unload
the dishwasher.

Rinse aid and salt indicator neons

o The neon indicates that you need to add rinse aid to the
appliance. You should follow the procedure outlined on page 13.
o The neon indicates that you need to add dishwasher salt to
the appliance. You should follow the procedure outlined on page
11 – 12.

Saving energy using your dishwasher

Loading dishes
o Refer to the relevant section of this manual for instructions on
placing items in the dishwasher for the most efficient cleaning.
o Only run the dishwasher when it is full for optimum energy and
water usage.
o Check the program table to select the most efficient program
according to the size and type of the load.
o The ECONOMY
temperature and uses less water during the cycle. That is better
for the environment and helps to cut energy costs as well as
your water bill if you're on a water meter.
o The rinse aid and salt indicator neons on the
control panel will let you know when the
appliance needs rinse aid or salt adding to it.
program washes your items at a lower
22