Changing A Wash Program; At The End Of A Wash Program - Baumatic BDWS60SS User Manual

o Select any program options that you want to use (e.g. delay start).
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent tablet may have
already released or you could have hot water escaping.
o Slightly open the door of the appliance.
o Wait for a minute before fully opening the door to ensure the spray
arms have stopped working, and to avoid scalding.
o Press and hold down the program selection button for 3 seconds to
cancel the wash program. Then use the program selection button to
choose the correct wash program.
o Select any program options that you want to use (e.g. delay start).
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.

At the end of a wash program

o A buzzer will sound for 8 seconds.
o Use the ON/OFF button to switch the dishwasher off.
o We would advise waiting for at least a few minutes before unloading
the dishwasher to avoid handling items which will still be very hot
and more susceptible to breakage. Items will also dry better if they
are left for longer in the dishwasher before unloading.
o Open the door of the appliance and unload the dishwasher.
22