Table of Contents
Advertisement
Changing the wash program
o Press the Start/pause button for more than three seconds.
o Press the program selection button to choose an appropriate
wash program for the load that you are washing. The program
indicator neons will show you which wash program you have
currently selected.
o Press the Start/pause button, after a few seconds, you will hear
the appliance continue with the new wash program that you
have selected.
o IMPORTANT: You should only change a wash program if the
detergent has not been released into the machine; otherwise
you may get poor wash results.
Pausing a wash program
o If you press the Start/pause button briefly during a wash
program, then the wash program will pause.
o The program indicator neon will stop blinking.
o The dishwasher will make an audible noise once a minute, until
the Start/pause button is pressed again.
o When the Start/pause button is pressed again, the originally
selected wash program will restart.
At the end of a wash program
o At the end of a wash program, an audible signal will sound for a
period of time.
o Use the ON/OFF button to switch the dishwasher off.
o IMPORTANT: You should leave the appliance for 15 minutes
BEFORE opening the door. This will allow the steam generated
from the final rinse(s) to dry the dishes.
o Carefully open the door of the appliance and leave it ajar for a
few minutes and allow any remaining steam to disperse.
o WARNING: Hot steam may escape when the door is first
opened, so care should be taken.
o Unload the dishwasher; you should take care in case any of the
items are still warm.
22
Advertisement
Table of Contents
