Husqvarna Viking Viking Royale User Manual page 61

PERFECTLY BALANCED SENSOR
ONE-STEP BUTTONHOLE
should be interfaced and/or stabilized where buttonholes
are to be sewn.
Buttonhole Menu B.
: Woven medium and stabilizer.
FABRIC
: Woven medium fabric and Buttonhole.
SELECT
:
USE
needle area.
3. Place your button on the buttonhole ruler on the
baseplate.
Before sewing, line up the white area on the side of the
wheel with the white marking line on the foot.
When sewing, your machine automatically sews the
The buttonhole size needed will vary with the thickness and
style of your button. Always stitch a sample buttonhole on
Note: For woven heavy and leather, the Exclusive SEWING
ADVISOR feature selects buttonholes that should not be sewn with
™
the Sensor One-Step Buttonhole Foot.
Sew the Buttonhole:
Mark the buttonhole placement on your fabric with
your PICTOGRAM ™
buttonhole.
The measurement wheel can be raised by lifting it,
which makes it easier to place the fabric under the
presser foot.
Note: Use the markings on the left toe of the Sensor One-Step
Buttonhole Foot to position the garment edge. Place the edge of the
garment at the middle mark to have 5/8'' (15 mm) from the edge to
the buttonhole.
is sewn away from you stabilizing the left buttonhole
column, then the satin column is sewn toward you.
This is repeated for the right column. The bartacks are
raised.
feature will select the
™
A
Sensor One-Step
Buttonhole Foot socket
Place fabric edge here to place
buttonhole 5/8'' (15 mm) from edge
1. Sewing direction for satin stitch buttonholes sewn with
the Sensor One-Step Buttonhole Foot
S 4:15
EWING