Husqvarna Viking Viking Royale User Manual page 42

Sensor Q-foot for embroidery
when you turn on the machine. When embroidering, using
When using another type of foot, e.g., the R-foot,
Thread Portioning.
deLuxe™ Stitch System
The deLuxe
needle thread: Thread Tension and Thread Portioning.
When activated, the machine will automatically use Thread
Portioning if possible. Depending on your other settings,
the machine will automatically use Thread Tension in some
the deLuxe
™
Tension.
Read more about the deLuxe
Presser Foot Height for Embroidery
Adjust the height of the presser foot in embroidery stitch-
out mode.
If there is not enough space between the presser foot and
the embroidery, the top thread will form loops on the
underside of the embroidery. Increase the presser foot
height in small steps until the embroidery moves freely
under the presser foot.
3:10
deLuxe
™
™
Presser Foot Height
for Embroidery