Husqvarna Viking Viking Royale User Manual page 116

Check Needle Thread
The machine stops automatically if the needle thread runs
out or breaks. Re-thread the needle thread, close the pop-
Embroidery Is Finished
Touch OK to get back to your design and stay in
Change to Cutwork Needle (optional accessory)
® Embroidery
Royale ™
this pop-up message is shown, insert the corresponding
to resume.
Note: These cutwork designs can also be stitched out without the
cutwork needles, but will then have to be cut manually.
Machine needs to rest
If the machine stops and this pop-up appears on the
screen, the machine needs to rest. When the OK icon is
enabled you can resume embroidering. The embroidery
results will not be affected.
Raise needle
When the needle is lowered with the handwheel to check the
needle position on the fabric, a pop-up message is displayed
when trying to adjust the hoop position. Check the box to be
Note: Make sure the needle is above the fabric to prevent damage to
the needle and fabric.
Note: The warning cannot be disabled when the needle is below the
stitch plate.
8:14