Husqvarna Viking Viking Royale User Manual page 38

SEWING SETTINGS
Twin Needle
Touch the Twin Needle icon to open a list for twin needle
width selections. When a twin needle size is selected, the
width of all stitches is limited for the selected twin needle
size to prevent needle breakage. The setting is kept until
you deselect the twin needle width.
When a twin needle size is selected, a pop-up message is
shown when turning on your machine. Another warning
pop-up message is shown when selecting a stitch that is
too wide for the selected twin needle size. The stitch width
needle. Deselect Twin Needle to go back to normal sewing.
Stitch Width Safety
straight stitch needle plate or a straight stitch presser foot.
The needle position is locked to center for all stitches to
prevent damage to the needle, presser foot or needle plate.
When turning on the machine with this setting activated
and for every stitch selection that is not a straight stitch, a
pop-up message informs you that it is set to straight stitch.
Note: Twin Needle and Stitch Width Safety cannot be used at the
same time.
Selective Thread Cutter Auto
automatically and the presser foot raises at color changes,
Thread Cutter Auto will be performed.
3:6