Panasonic DP--8020E Operating Instructions Manual page 9

This completes the authentication.
After completing the authentication, you can use the selected function
(copying, faxing, scanning, or printing) .
Note:
If the authentication fails, one of the following messages may appear.
Message
LOGIN FAILED
LOGON ATTEMPTS EXCEEDED
CONNECTION FAILED
PROTOCOL ERROR
SERVER NOT FOUND
Authentication is cancelled if no operation is performed on the machine within a certain period of time after
authentication is completed. In this case, you need to perform user authentication again before you can use
the machine. The system administrator can specify the ID Timeout Period.
See "ID Timeout Setting" on page 16 for details.
The system administrator can specify whether authentication is required independently for each machine function
(copying, faxing, scanning, and printing).
See "Authentication Setting" on page 12 for details.
The login failed.
Check your user name and password.
Check whether the Date and Time is set properly.
The system has been locked because the permitted number of login
attempts has been exceeded. Please contact the system administrator.
Unable to connect to the authentication server. Please contact the system
administrator.
Unable to connect to the authentication server. Please contact the system
administrator.
Unable to locate the authentication server.
Check whether the DNS Domain Name is set properly (see page 15).
Check whether the Internet Parameters are set properly.
TCP/IP Address
TCP/IP Subnet Mask
TCP/IP Default Gateway
DNS Server Addresses
READY TO COPY
Explanation
COPIES:001
9