Id Timeout Setting - Panasonic DP--8020E Operating Instructions Manual

ID Timeout Setting

If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed
on the machine for a specified time period after performing authentication. The ID timeout period is set by the
"AUTO RESET TIME Setting" on page 17.
Note:
When the User Authentication function is enabled, you must login to the machine to change settings.
See the following sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Press , and login to the machine.
COPY
Press
FUNCTION
Press .
Enter the key operator code (3-digit), and then press
Note:
The key operator code is established by the system administrator.
A default value of the key operator code is "000".
Press .
Select the ID Timeout setting.
: (AUTO RESET TIME) An authenticated user will be logged
SET
out if no operation is performed on the machine for a specified
time after performing authentication.
: (AFTER EVERY JOB) An authenticated user will be logged
SET
out when the performing operation is completed.
Press to return to standby.
STOP
16
.
SET
READY TO COPY
GENERAL PARAM. (0-9)
ENTER NO.
09 KEY OPERATOR MODE
ENTER PASSWORD=
KEY OPR. MODE(00-40)
.
SET
ENTER NO.
35 ID TIMEOUT
1:AUTO RESET TIME
READY TO COPY
COPIES:001
OR
OR
COPIES:001