Cid Call Display; Call Forwarding - All Calls - NEC DT310 User Manual

CID Call Display

To Display Calling Party Information:
Press CID key, CID lamp lights.
Calling Party information is displayed.
To Redisplay Calling Party Information:
While on a call press CID key to recall the Calling
Party Information.
Calling Party information is displayed.

Call Forwarding - All Calls

To Set
Press Speaker key. Receive dial tone.
Press FD-A key or dial Call Forward-All access
code. Receive special dial tone.
Dial destination station or outside telephone
number. Receive service set tone
FD-A LED lights (at your station if FD-A key was
used).
Press Speaker key. Call Forwarding for all calls is
set.
FWD
4:26 PM
Forwarding
station
2000
TUE 12 FEB 2008
To Verify (With Multi-line Phone)
Press Speaker key. Receive extension dial tone.
Press FD-A key or dial Call Forward-All access
code.
Display indicates the station number calls are
forwarded to.
FWD
4:26 PM
To Cancel
Press Speaker key. Receive dial tone.
CNCL
4:26 PM
Press FD-A key plus * or dial Call Forward - All
cancel code. Receive serve set tone. LED goes out
at your station (or the phone of the sub line station).
Press Speaker key.
42
2000
TUE 12 FEB 2008
TUE 12 FEB 2008