Replacing The Converter Board; Procedure; Postrequisites - Dell XPS 2720 Owner's Manual

Table of Contents

Advertisement

Replacing the Converter Board

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Procedure

1
Align the screw holes on the converter board with the screw holes on the
middle cover.
2
Replace the screws that secure the converter board to the middle cover.
3
Connect the converter cable to the converter board.
4
Connect the display-backlight cable to the convertor board and secure the tab.

Postrequisites

1
Replace the back cover. See "Replacing the Back Cover" on page 18.
2
Follow the instructions in "After Working Inside Your Computer" on page 13.
24
|
Replacing the Converter Board

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xps 27W06c

Table of Contents